HELICAL DRIVE FIX REPLACEMENT WALL TIES
Helical Drive Fix Replacement Wall Ties are remedial ties used to anchor building façades to structural members, stabilise multiple width brick walls or as remedial wall ties to re-tie a wide range of differing materials like air-crete blocks, clay bricks, stone, concrete blocks and timber studs.
Helical Drive Fix Replacement Wall Ties are made from 304 grade austenetic stainless steel, require no additional parts and are fire rated.
Simple and easy to install and require no bonding resin or grout to achive an acceptable pull out load.
Effective solution for tying cavity and solid walls and can be installed through cavity insulation.
High tensile strength with flexibility and allows for thermal movement.
Helical Drive Fix Replacement Wall Ties are installed using a proprietary setting tool that is used with an SDS-Plus shank hammer drill to drive and countersink the tie. The helical design allows the tie to be driven quickly and easily into a 5.5mm pre-drilled pilot hole. As the tie is driven into the substrate, the fins of the tie undercut the masonry to provide an expansion-free anchorage that will withstand tension and compression loads.
Showing all 4 results