DANOFLEX Primer 5kg
Instruction for Use:
DANOFLEX Primer should be applied in dry conditions between 5°C and 30°C ambient air temperature. Do not begin if conditions could fall outside of the temperature range and/or if rain appears likely. For best results apply in cool overcast conditions and avoiding direct sunlight if possible. DANOFLEX Catalyst required. See full application manual for amounts of catalyst to use.
Application Equipment / Tools:
For applying the product: Roller (or brush if access is restricted).
Substrate Preparation:
Clean the substrate with an RML Cleaning Agent and a lint-free cloth and allow the surface to dry completely (approx. 15 minutes) prior to application of the product.
Mixing:
Mix the primer thoroughly by stirring within the original container prior to application.
Application:
Roller-apply a thin coat of primer to the substrate. Avoid excess build-up of material in all areas, and especially in corners. If necessary, use a brush to spread the material evenly and avoid greater layer thicknesses. The cure time is approximately 30-60 minutes depending on application conditions. Ensure that the Flexible Polyester Primer is overcoated within 7 days. Further information can be found within the DANOFLEX Resin Application Manual.
Cleaning:
When work is completed, clean the tools thoroughly with an RML Cleaning Agent within the pot life of the material. This can be done with a brush. Do not use the tools again until the Cleaning Agent has evaporated fully. Simply immersing the tools in the cleaning agent will not prevent the material from hardening. Information on Safety and Risks: Please refer to the safety data sheets for the products used.
General Information:
The above information, especially information about application of the products, is based on extensive development work as well as many years of experience and is provided to the best of our knowledge. However, the wide variety of requirements and conditions on site mean that it is necessary for the product to be tested to ensure that it is suitable for the intended purpose. Only the most recent version of the document is valid. We reserve the right to make changes to reflect advances in technology or improvements to our products.
Reviews
There are no reviews yet.