High Impact Plaster Finish
High Impact Plaster Finish is highly durable and designed to provide a quality, long-lasting finish over Renovation Plaster, or a range of other substrates, including existing gypsum plaster, plasterboard and lime based backgrounds.
High Impact Plaster Finish should be used as part of the Replastering System, after the installation of a damp-proof course. It is also an ideal product to use as part of flood remediation due to its breath-ability and domestic commercial environments such as hospitals, schools and children’s nurseries which are prone to accidental damage.
- Contains perlite for improved thermal performance.
- Prevents formation of black mould.
- Reduces risk of condensation.
- Easy to use – very light weight and premixed for quality control.
- Prevents damp and salt migration.
- Fibre reinforced – eliminates cracking.
- Inhibits rusting of angle beads, conduits etc.
High traffic commercial environments such as hospitals and children’s nurseries, Domestic environments which are prone to accidental damage, such as family homes, As a finish over plasterboard, As a finish over existing gypsum plaster and lime backgrounds, As part of flood remediation works.
High Impact Plaster Finish is applied in a single coat at a thickness of 2 – 5 mm.
Note: Do not apply at a thickness less than 2 mm or the high impact properties will not be achieved.
Coverage at 2mm – upto 10m² depending on substrate.
Conditions & Limitations
High Impact Plaster Finish is not suitable for application on to sand/cement mixes and should only be used for interior plastering works. The product has a matte finish and should therefore not be overworked.
The product should not be applied in temperatures under 5°C and rising or if temperatures are expected to fall below 5°C within 24 hours. Ensure the substrate temperature is not below 5°C before commencing application.