No products in the basket.
Solseal FLM Flexible Liquid Membrane 15kg
£237.60 (inc. VAT and standard delivery)
SKU: SOLSEALFLM
Categories: Damp Proofing Systems, DAMP PROOF PAINT
Tags: Flexible Liquid Membrane, Solseal
Solseal FLM Flexible Liquid Membrane 15kg
Solseal FLM Flexible Liquid Membrane 15kg is a high grade Polyurethane, multi purpose membrane. It is a rapid curing liquid applied coating which cures by reaction with atmospheric moisture to produce a flexible and elastomeric membrane which is defect free with excellent adhesion to a variety of substrates. Being liquid applied, the material allows a completely seamless application over an entire area, even if the structure is complex and undulating.
Solseal Flexible Liquid Membrane will accommodate a degree of substrate movement although it is essential that the supporting substrate is sound and stable. It can be applied to: Concrete, Masonry, Ferous Metal, Lead, Copper, Timber, Felt, Asphalt /Bitumen, Gypsum & Fibrous / Cement Boards, Polyurethane Insulation Foams, EPDM membranes & Cement Roof Tiles.
Solseal Flexible Liquid Membrane is not recommended in contact with potable water systems or chemically treated swimming pools.
Suitable For:
Internal & External Tanking
Sub-structures & Basements
Lift Pits
Retaining Walls
Ground Floor DPM
Parapet Wall & Plinths
Balconies & Verandas
Reservoirs
Planters
Podium Decks
Gutters
Water Storage Tanks & Ponds
Roofs
Solseal PU4 primer is required which is a is a single component same day primer that takes 4 hours to become tack free, you can then apply Solseal Flexible Liquid Membrane over this primer. It can be applied to concrete, timber, bitumen, metal and most substrates.
Coverage: Applied in two coats 15kg will yield 15ltrs, allow for 1 litre to cover 1m2
When designing Type A structures as classified in BS 8102:2009) the product when applied correctly is capable of providing levels of protection required for
Grades 1, 2, & 3 basements.
Excellent UV Resistance
1.5mm Thick, Bubble Free, Single Coat Application
Self-Accelerated Curing Time – Resistant to Rain in 1 Hr
Bubble & Defect Free Membrane
High Tensile & Tear Resistance
Good Chemical Resistance
High Resistance to Extreme Temperatures of -40° to +80°
High Resistance to Abrasion, Very Flexible & High Elasticity
Excellent Adhesion to all Substrates (with appropriate Primers)
Water Vapour Barrier
Application & Primer Selection (Example shown for Concrete surfaces):
Clean the surface using a high pressure washer if possible. Remove any oil, grease and wax contaminants.
Cement laitance, loose particles, mould release agents, cured membranes must be removed. Fill any surface irregularities with a suitable product. Once the above procedure has taken place apply a suitable primer from the list below. Primers should always be used as it seals and adheres products to the substrate.
▪ Solseal Primer PU4 is a single component same day primer that takes 4 hours to become tack free, you can then apply Solseal Flexible Liquid Membrane over this primer. It can be applied to concrete, timber, bitumen, metal & most substrates
▪ Solseal Primer PU24 is a single component primer that takes 12 hours to dry. It is a next day primer (or several weeks) you can then apply Solseal Flexible Liquid Membrane over this primer. Solseal Primer PU24 can be applied over wet concrete, rainy conditions after application has no effect on performance. It can be applied to concrete, timber, bitumen, metal & most substrates. Solseal Primer PU24 has a low viscosity, is user friendly and is a good penetrating primer.
Apply the Solseal Flexible Liquid Membrane with a suitable roller or brush in one or two coats. Do not exceed 48 hours between coats.
Data Sheet: Solseal – FLM Datasheet 2019
Standard delivery is free of charge 2 – 3 day economy service.
We cannot offer a delivery day or time within this service. You can upgrade your delivery service from our menu of delivery services including next day, next day am.
Please allow plenty of time for materials ordered for a specific job at a specific time and day as we cannot guarantee third party delivery services.
Please read our delivery terms and conditions ahead of ordering.
Be the first to review “Solseal FLM Flexible Liquid Membrane 15kg” Cancel reply
You must be logged in to post a review.
Reviews
There are no reviews yet.