Epoxy Crack Repair LV
£36.74 (inc. VAT and standard delivery)
Epoxy Crack Repair LV 750ml
Epoxy Crack Repair LV is a low viscosity, two part, solvent free, epoxy resin liquid for penetrating and sealing fine hairline cracks found in concrete, brick and stone. This product exhibits superb penetrating powers into the finest of cracks. (Consistency like water)
It is used for permanent sealing hairline cracks found in damaged concrete, stone and brickwork. For impregnating porous cement screeds, weak concrete and brickwork. Ideal for impregnating and strengthening porous cement screeds.
An ideal product to impregnate and strengthen weak cement screed that is supporting a suspended flooring.
PACK: 750 ml. This being the combined weight of Pack A (Resin) and Pack B (Hardener) when mixed together.
POT LIFE: When fully mixed, approximately 30 minutes @ 20°C. Extended pot life at lower temperatures.
CURING TIME: Initial cure after 24 hours @ 20°C. Full cure after 7 days.
CHEMICAL RESISTANCE: Resistant to spillages of many chemicals commonly met within industry.
SHELF LIFE: 12 Months if stored in dry cool conditions.
For sealing wider vertical cracks use Epoxy Crack Repair T (Thixotropic) for the sealing of wide vertical cracks and as a excellent gap filling adhesive for concrete, stone, brickwork and timber. This product is a superb adhesive for bonding together most building substrates.
PREPARATION: Remove all loose material and vacuum the crack clean. Compressed air blowing to remove all debris collected within the crack is the ideal preparation method. For pressure injection, secure the pressure injection nipples at 150mm centres along the length of the crack. Secure the injections points with GENERAL PURPOSE ADHESIVE. Face up the crack between the injection nipples with EPOXY FILLER. Allow the Epoxy Filler and General Purpose Adhesive to harden for 12 hours.
APPLICATION: For floor cracks the normal method of application is by gravity feeding. Continue to feed the crack until satisfied. For pressure injection, attach a plastic pipe between the injection nipple and the barrel mastic gun and pump resin into the crack. For cement screed strengthening saturate the surface with Epoxy Grout LV and allow to penetrate.
MIXING: Empty the entire contents of Pack B (Hardener) into Pack A (Resin) and mix thoroughly for 2—3 minutes. Mixing can be carried out by hand using a flat blade knife or by using a slow speed electric drill and paddle attachment. Ensure you reach the bottom and sides of the tin to thoroughly mix together both components. Having mixed the two components together use all within 30 minutes.
Standard delivery is free of charge 2 – 3 day economy service. We cannot offer a delivery day or time within this service. You can upgrade your delivery service from our menu of delivery services including next day, next day am. Next day services do not include weekends.
Please allow plenty of time for materials ordered for a specific job at a specific time and day as we cannot guarantee third party delivery services. Please allow plenty of time for your order to be with you in good time.
Please read our delivery terms and conditions ahead of ordering.
2 reviews for Epoxy Crack Repair LV
Add a review
You must be logged in to post a review.
You may also like…
Concrete Repairs
Concrete Repairs
Pauk Graham (verified owner) –
I was very pleased with results.
The crack although fine seems to have penetrated it
Aidan Merrick –
Hi Paul,
Many thanks for your review. Our epoxy products always seem to return satisfactory reviews, so glad to hear that
it worked on your project. Please bare us in mind for any future projects.
Many Thanks
Regards
Alliance Remedial Supplies
Rich Waight (verified owner) –
Very low viscosity resin. Flows nicely through a syringe needle and into a fine crack in my paver.