Koster FS Primer 2C
£44.19 (inc. VAT and standard delivery)
Koster FS Primer 2C – 200ml
Koster FS Primer 2C is a fast curing, transparent, solvent free two component bonding agent. It is used as a primer for the subsequent application of Koster Joint Sealant FS-H and FS-V.
FS Primer 2K is a bonding agent for polysulfide joint sealants.
The substrate can be dry or pore saturated, however there may be no water film visible on the surface. The substrate must be free of silicones, loose particles, oil, and grease. For cleaning substrates, we recommend the use of dirt and grease dissolving water or solvent based cleaning agents. If necessary hot steam clean, grind lightly, or roughen by sandblasting.
Technical:
| Viscosity | low viscous |
| Specific gravity | approx. 1.1 g / cm³ (+ 20 °C) |
| Pot life | approx. 12 min. (+ 20 °C) |
| Installation temperature | + 5 °C – + 30 °C |
| Next layer | after 30 – 180 minutes |
Consumption:
Approx. 10 – 20 g / m or approx. 20 g / meter of joint.
The consumption varies depending in the roughness and porosity of the substrate and the width of the joint flanks.
Standard delivery is free of charge 3 – 5 day economy service. We cannot offer a delivery day or time within this service. You can upgrade your delivery service from our menu of delivery services including next day, next day am.
Please allow plenty of time for materials ordered for a specific job at a specific time and day as we cannot guarantee third party delivery services. Please allow plenty of time for your order to be with you in good time.
Please read our delivery terms and conditions ahead of ordering.
Be the first to review “Koster FS Primer 2C” Cancel reply
You must be logged in to post a review.
Reviews
There are no reviews yet.