Newton HydroCoat 103 2K – High Performance Liquid Waterproofing Membrane
Newton HydroCoat 103 2K is a two-component, thixotropic, cementitious modified polymer waterproofing membrane with high adhesion, designed for the internal and external waterproofing of concrete and steel elements of water-retaining/water resisting structures such as reservoirs, water tanks, below ground structures, podium decks, balconies and parking areas.
Capable of resisting extremely high positive and negative water pressure, HydroCoat 103 2K forms a hard, highly alkaline coating with a degree of elasticity which has greatly enhanced chemical resistance and so is particularly suited for the protection of concrete within sulphate contaminated ground. It has excellent resistance to the ingress of acid gases, moisture and chlorides to enhance the durability of reinforced concrete and protect highway and coastal structures from chloride attack. HydroCoat 103 2K is reinforced over static joints and at details and changes of direction with HydroCoat 912-RT.
KEY BENEFITS
- Very waterproof – Resistant to 10 bar positive and negative pressure
- Quick application in one coat to horizontal surfaces
- Non-toxic when cured • Sprayable – Up to 2 m2 per minute is possible
- Hard, durable and UV-stable trafficable finish • All year round application to damp substrate
- Can be applied at temperatures as low as 5°C
- Very low VOC content
- Very high diffusion resistance to carbon dioxide gas and chloride ions; equivalent to 100 mm of concrete cover
- Excellent adhesion to sound prepared concrete substrates and steel
- Thixotropic – can be applied at 1 mm to vertical surfaces
- High build coating of 2 mm eliminates the incidence of small defects seen within thinner membranes
TYPICAL APPLICATIONS
Waterproofing of:
- Podium decks, balconies and car parking areas
- Concrete water-retaining structures such as water tanks and reservoirs
- Concrete earth-retaining foundation walls to both the positive and negative side
- Internal concrete surfaces of walls and rafts or slabs to earth-retained structures such as habitable basements, car parks, plant rooms and lift-pits
- Concrete temporary lay down and working areas
Correctly prepared substrates of: Waterproofing of:
APPLICATION RATE
- The membrane is applied to a total thickness of 2.0 mm, which requires an application rate of 3.6 kg/m2.
- Walls and soffits
- Application is by two coats, each of 1.8 kg/m2.
- Horizontal surfaces
- Application is by two coats, each of 1.8 kg/m2 or by a single coat of 3.6 kg/m2.
- At a thickness of 2.0 mm, a 30kg composite pack covers a total surface area of 8.3m2.
Reviews
There are no reviews yet.