Clear Coat Block Sealer

Clear coat block sealer is a ready‐to‐use, clear sealant for block paving, paths and driveways.

Benefits:

• Protects from water penetration; staining and dirt/grime build‐up.
• Advanced “Hybrid” technology.
• Ready to use.
• Excellent abrasion and chemical resistance.
• Contains fungicide which inhibits organic growth.
• Solvent‐free ‐ low odour.
• Facilitates easy cleaning.
• Improves water and UV resistance.

Uses:

Designed to protect from water penetration, oil or grease spillages and dirt/grime build-up. Will enhance present colour and extend the lifespan of the treated surface. Designed for use with cobble lock block paving only.

Preparation:

Remove any moss or lichen that may be present. Ensure the surface to be treated is free from oil, grease, dust and any other loose material that may hinder adhesion. It is recommended that a test be carried out on a small inconspicuous area to ensure the required effect is achieved.

Application:

DRIVE ALIVE CLEAR COAT BLOCK SEALER is ready to use, and does not require diluting. We advise that you test this product on a small inconspicuous area prior to use to check compatibility. STIR WELL BEFORE USE. Ensure that the surface is completely dry. Apply a single coat using either a brush, roller or squeegee, ensuring no pooling or ponding occurs. Allow 3-4 hours drying time before trafficking the area. Application temperature between +5ºC and +30ºC. Colder humid conditions will slow drying times.

Coverage:

One 4 Litre container will cover approximately 15m² for a single coat depending on surface porosity.

Container Size: 4L rectangular plastic tub. Colour Milky white liquid.