Delta LM 800 Liquid Membrane 10ltrs
Delta LM 800 is an innovative, robust and flexible liquid membrane suitable for damp proofing, waterproofing and ground gas protection conforming to BS 8102:2022 and BS 8485:2015+A1:2019. Delta LM 800 performs excellent under high compressive loads and offers maximum protection in just one application. Delta LM 800 offers a simple and continuous prevention barrier against the ingress of methane, carbon dioxide and radon and moisture into buildings. Delta LM 800 is an elastic, UV-resistant, single component system supplied in black. This non-hazardous product can be applied direct from its packaging using a roller, brush or airless spray.
Designed for use in applications where combined damp proofing and gas protection are required. Delta LM 800 can be applied by brush, roller or airless sprayer. Apply first/ priming layer at rate of 0.5kg/m² ensuring that coating is applied evenly over the surface. Allow first coat to fully dry, drying times may vary due to ambient conditions. (Product will change colour from light grey to black when dry). Apply second coat at rate of 0.5kg/ m², where there are joints or uneven surfaces a 3rd coat may be required. Protect application from frost and rain until application is fully dried and cured. Application should only be made when air and surface temperature is 5°C and rising.
Total application thickness should not exceed 4mm and should be at least 1mm.
- Waterproof and damp proof
- Multiple physical properties, including resistance to methane, carbon dioxide and radon. Complies with BS 8485:2015+A1:2019 Code of practice for the design of protective measures for methane and carbon dioxide ground gases for new buildings
- BS 8102:2022, Protection of below ground structures against water ingress. Code of practice.
- Ideal for complex detailing and difficult to reach areas
- Fully bonded system
- Continuous application – no sealing required at construction joints/laps
- Can be applied to damp surfaces or newly poured concrete – Quick drying
Coverage
- Priming coat – 0.5kg/ m², second coat 0.5kg/ m² = 10m² per tub
Reviews
There are no reviews yet.