No products in the basket.
Epoxy Mortar for Damaged Concrete Floors
£56.99 – £95.99 (inc. VAT and standard delivery)
Epoxy Mortar for Damaged Concrete Floors
Epoxy Mortar is an incredibly tough, solvent free epoxy resin ideal for repairing worn or damaged concrete, bay edges, form shallow ramps, make up differences in floor levels and resurfacing steps. Also used to set in place metal guide rails. Epoxy Mortar repairs can be feather edged. A Tack Primer should be used with this mortar.
It provides a smooth, slip resistant, dust free surface. Rapid strength development enables the return to use of heavy fork truck trafficking within 24 hours. Refer to our website for Special grades for application onto wet surfaces, vertical or overhead surfaces, within extremely cold conditions or faster curing.
POT SIZE: 10kgs & 20kgs
COVERAGE: 10 kg will cover 1.7m² at 3mm depth.
YIELD: 10kgs – 5 litres / 20kgs – 10 litres
COLOURS: Natural, Mid Grey, Slate, Black and Red
POT LIFE: When fully mixed, approximately 30 minutes @ 20°C. Extended pot life at lower temperatures, reduced at higher temperatures.
CURING TIME: Hard cure after 12 hours @ 20°C. Full cure with maximum hardness after 7 days @20°C
CHEMICAL RESISTANCE: Resistant to spillages of many chemicals commonly met within industry.
Occasionally wipe the face of the trowel to release the build up of resin tack and clean all tools with CLEANING SOLVENT.
Epoxy Mortar is an incredibly tough, epoxy resin mortar ideal for repairing damaged concrete, broken bay joint edges and worn steps. It can be used to form ramps and make up differences in floor levels.
Epoxy Mortar can be laid at any depth from feather edge up to 100mm. Epoxy Mortar is suitable for the permanent placement of shutter doorway guides into concrete.
– Can be applied inside or out
– Sets in less than 2 hours
– Granite hard finish
– Outstanding impact resistance
– Excellent chemical spillage resistance
– Non slip finish
– No primer required
– Wide range of colours
– Available in 10kg and 25kg twin packs
COVERAGE:
10 kg will cover 1.7m2 at 3mm depth.
Surfaces must be sound, dry and free from grease, oil and other forms of contamination. Wire brushing is advisable. Remove any loose materials and sweep clean.
Cleaning is imperative and the best results can be achieved by use of concrete cleaner.
Firstly, stir each pack thoroughly. Take equal quantities from Pack A (Resin) and Pack B (Hardener) and mix until a uniform grey is achieved. Mixing can be done on a clean timber board, within a clean plastic bucket or on any dry clean surface. Do not mix more than can be used in approximately 15 minutes.
Our list price includes free 2 – 3 day economy delivery service.
You can upgrade to next day delivery service at Checkout.
Delivery services do not include weekends.
Cut of point for orders is 1pm for next day services.
Please allow plenty of time for your delivery as we cannot guarantee 3rd party delivery services and we do not accept liability for late deliveries.
1 review for Epoxy Mortar for Damaged Concrete Floors
Add a review
You must be logged in to post a review.
You may also like…
Floor Cleaners
£15.99 – £58.79 (inc. VAT and standard delivery)
Floor Cleaners
£24.20 – £51.99 (inc. VAT and standard delivery)
Tony Fellows (verified owner) –
Did exactly what it said on the tin. Was easy to mix and apply, i am very satisfied with this product, I used it to repair a crumbling Garage entrance ,creating a ramp. Looks great,dried really hard. Will definitley use Alliance again.