ISO-THERM Damp Proofing Thermal Insulation
ISO-THERM Damp Proofing Thermal Insulation an ultra thin (+/-4mm) specially woven polyester based material, which is both unique and patented. Available in rolls of 0.95 metre wide, it is flexible and lightweight and will accommodate a multitude of wall finishes.
Due to its ease of use and flexibility it can be cut around light switches/sockets/radiator brackets and the like, and is minimally invasive in its installation. Very often , door architraves and skirting’s can remain in place, and because of its malleability it fits around and into window reveals with ease.
It is fixed in place with our unique ISO-THERM adhesive, normally trowelled onto the wall to a thickness of circa 5mm, and with the ISO-THERM affixed and rolled into the adhesive, the overall finished depth after a direct plaster skim coat is approximately 10mm.
ISO-THERM is vapour permeable, but waterproof, thereby resisting any lateral damp transference, and stopping the subsequent natural surface nitrates and chlorides forming as an efflorescent salt. Because of its high thermal benefit, and the withholding of any natural damp transference it is highly resistant to any formation of surface mould.
The sheer speed of application, and the ability to apply direct to sound plastered walls, means that large areas can be applied in a very short space of time, and save for the plaster skim coat and painting, both residential and commercial properties suffering from cold and damp/mouldy walls can be improved substantially with the minimum of disruption.
ISO-THERM ADHESIVE is a mineral adhesive, ready for use. Composed of stabilised potassium silicate, siliceous aggregates, quartz sand with specific granulometry and other additives. It is permeable and water repellent.
Roll Size – 0.95m x 7.5m (7.125m²)
Reviews
There are no reviews yet.