Newton HydroCoat 903 Primer 5Ltrs

Newton HydroCoat 903 Primer 5Ltrs

Newton HydroCoat 903 Primer is a modified styrene/acrylic copolymer primer for concrete that is applied prior to the installation of Newton’s range of high performance cementitious waterproofing membranes, concrete repair and floor coating products, minimising the risk of out-gassing from both internal and external concrete substrate.

The primer is extremely quick and simple to apply by broom, airless spray, roller or squeegee, Newton HydroCoat 903 Primer can be applied over new and damp concrete and is soon ready for the application of the Newton membrane above, providing for continuity of work even during the wetter months of the year when most membrane systems cannot be used.

Key Benefits

• Extremely quick to apply – 10m²/min is possible
• Can be applied to damp/wet concrete
• Can be applied to new concrete > 20N/mm²
• Further increases the adhesion of Newton cementitious slurries, coatings and repair products to the concrete substrate
• Very quick curing – the membrane or coating can be applied within 40 mins at 25ºC and within 90 mins at 5ºC

Typical Applications

Newton 903-P is a primer for concrete before the application of Newton’s range of high performance cementitious waterproofing membranes, levelling compounds, concrete repair and floor coating products.

Extremely quick and simple to apply by broom, airless spray, roller or squeegee, Newton 903-P can be applied over new and damp concrete and is soon ready for the application of the Newton membrane above, providing for continuity of work even during the wetter months of the year when most membrane systems cannot be used.

APPLICATION RATE

• 0.1 – 0.2 litres/m².

The product must be fully taken into the surface of the concrete. Excess product that does not soak into the concrete must be removed.