Newton Multi Plug Fixings With Seals Qty 100 A1

Newton Multi Plug Fixings With Seals Qty 100 A1

Newton Multi Plug Fixing Plugs are used to secure cavity drain membranes to brick, concrete, stone and other masonry surfaces. They are supplied with a rubber grommet so that when the plug is fixed into the substrate the grommet creates a compression seal against the membrane to stop any water ingress.

The Newton Multi Plug Fixing also has a pre formed hole in the head of plug allowing battens or tracking systems to be secured to it via a size 10 screw.

The Multi Plugs are designed to give a rapid fix into varying substrates. It is installed into 10mm holes and accommodates timber battens or dry lining frames. The Multi Plug Fixing can accept wall tie fixings enabling internal walls to be built off the system.

Installation is quick and easy, simply drill a 10mm to a depth of 70mm. Then put the plug into the hole and use a large head club hammer to gently drive the plug in, making certain that a good even seal is achieved.

Dimension: 10mm x 60mm