Vectaire Elegance EL1003 Continuous Running Extract Fan 4″
- Vectaire Elegance 1003 with energy efficient EC motor – lowest energy consumption in the UK
- provides low level continuous ventilation to control condensation
- 3 speed axial fan
- choice of 2 low speeds at installation
- wall, ceiling or window (with additional window kit)
- for any domestic wet room
- low noise levels and running costs
- Sfp down to .09 w/l/s
- compliant with Building Regulations Parts L1 2013 and F 2013
- SAP PCDB Listed
General
- SAP PCDB Listed (dMEV) ultra modern, technically innovative high performance, low noise level fan
- to exhaust air and fumes directly outside (through wall, or window installation with additional window kit, or with medium length ducting – up to 6m)
- suitable for any domestic wet room, toilets, shower-rooms, bathrooms, utility rooms and kitchens
- runs continuously at pre-selectable choice of two lower speeds (fixed at installation)
- Speed 1 operates at 8 l/s (factory set)
- Speed 2 operates at 13.6 l/s
- with anti-vibration gasket
- all models incorporate cord which can be removed to allow other types of switching
- speed boosted to maximum (26.9 l/s) using integral pull cord or by:
- remote switch/light switch
- PIR sensor
- DRH240 (dynamic remote humidistat)
- the design of the EL1003 allows intake of air around the whole perimeter
- patented anti-turbulence deflectors ensure very low noise levels and optimum performance
- energy saving ventilation
- extremely low running costs
- low carbon footprint
- 5 year warranty – 1 year parts and labour, 4 years parts only
- These fans are NOT suitable for use with Gravity Grilles. They should be installed using either Cowls or Fixed Grilles.
Specification
- shockproof, high quality technopolymer casing
- designed using latest wind tunnel technology and CFD simulations
- EC induction motor with thermal protection
- 30,000 hour life motors with maintenance free and long life ball bearings
- operates in ambient temperatures up to 40ºC
- double insulated – no earth required
- IPX4 – Splashproof rated – can safely be installed in Zones I and II
Compliance
- Part L1A 2013 of Building Regulations for enhanced energy saving capability
- Part F 2013 of Building Regulations for reliable, efficient ventilation
- IEC 60335-2-80, BT 2006/95/CE and EMC 2004/108/CE European Directive against radio interference and electro-magnetic compatibility
- CE marked
- SAP PCDB Listed
- Energy Saving Trust Best Practice Compliant
Reviews
There are no reviews yet.