DryFix Epoxy Tack Primer VG (Vertical Grade)
DryFix Epoxy Tack Primer VG is a two part, solvent free, epoxy resin primer and adhesive designed primarily as a primer to be applied vertically prior to applying our Epoxy Mortar. The adhesive strength and performances are exceptionally high and therefore make it an excellent product in its own right for filling cracks found in concrete walls.
USES: As a general primer for vertical repairs using our Epoxy Mortar. For the permanent bonding of our Epoxy Mortar to concrete, stone, brick and timber surfaces. Ideally suitable for filling wide cracks found in concrete walls.
PREPARATION: Surfaces must be dry and free from grease, oil and other forms of contamination. Remove any loose materials. Cleaning is vitally important to maximise the products performance. Wire brushing is advisable.
MIXING: Empty the entire contents of Pack B (Hardener) into Pack A (Resin) and mix thoroughly for 2—3 minutes. Mixing can be carried out by hand using a flat blade knife. Ensure you reach the bottom and sides of the tin to thoroughly mix together both components. Having mixed the two components together use all within 30 minutes.
APPLICATION: Immediately after mixing apply by small brush. Apply all within 30 minutes. As the name suggests, the subsequent Epoxy Mortar must be laid upon a “tacky” wet Tack Primer surface. Should the Tack Primer become dry and tack free, then a further application must be applied. It is vitally important the Epoxy Mortar must be applied to a wet Tack Primer surface.
Reviews
There are no reviews yet.