DryFix Epoxy Sealer
DryFix Epoxy Sealer is a two-part, solvent free, epoxy resin for sealing and impregnating concrete floors that demand outstanding performance. A tough, durable, chemical resistant surface that are easy to clean. The glazed finish is capable of withstanding heavy fork trucks and intense pedestrian trafficking.
This sealer is most suitable for application to garages, factory floors, warehouses, workshops, food processing areas and storerooms, warehouses and most concrete floors that demand a tough, dust free environment, can withstand fork trucks and offer high chemical spillage resistance.
Concrete floor surfaces must be clean, sound, dry and free from grease, oil and other forms of contamination. Concrete laitance should be removed by either acid washing using CONCRETE ETCH or by floor grinding.
Apply the sealer immediately after mixing by brush or roller. Two coats are normally required for maximum resistance.
COVERAGE
4.5 Litres will cover up to 30m² depending upon the site conditions that prevail i.e., porosity and texture and temperature of the substrate.
MIXING: Empty the entire contents of Pack “B” (Hardener) into Pack “A” (Resin) and stir using a mixing paddle and an electric drill on a slow speed for 3 minutes. For small quantities mix by hand. Ensure you reach both the sides and bottom of the container during the mixing process. Once fully mixed use all within 35 minutes.
Reviews
There are no reviews yet.