Koster Crisin Cream
Koster Crisin Cream is a retroactive DPC (Damp Proof Course) waterproofing against capillary rising moisture. It can be applied from inside and/or from the outside of the building. It can be applied in cases of high degrees of moisture penetration (95% +/- 5% saturation) and with all degrees of salt contamination.
Holes with a diameter of 14 mm are drilled horizontally, ideally in the lowest masonry joint. Drill until 3 cm away from the wall end, do not drill completely through the wall. The drilled holes are cleaned by flushing with water or with compressed air. The holes are spaced 10 cm apart independent of the wall thickness.
Koster Crisin Cream is injected from the cartridge with the proper Koster Hand Pistol fitted with an injection tube. When using the 600 ml tubular bags, the tubular bags are placed in the cartridge gun fitted with the injection tube and the tubular bag opener and pressed into the holes. When installing the material, make sure that the borehole is filled evenly and without voids from the back to the front. The holes can be sealed immediately with Koster KB Fix 5 flush with the wall.
When using self-priming processing equipment the 10 l buckets are used to refill the cartridge. The material consumption must be checked and documented for the purpose of quality assurance.
|Material basis||Resin silane combination|
|Density||0,85 g / cm³|
|Active ingredients||approx. 85 %|
|Application temperature||+ 5 °C to + 35 °C|
12 cm wall thickness: approx. 140 ml / m;
36 cm wall thickness: approx. 510 ml / m
|Wall thickness (cm)||Consumption (ml / m)||Yield / 310 ml Cartridge (m)||Yield / 530 ml cartridge (m)|