Bond It Mega Stik Plasterboard Adhesive – Polyurethane Adhesive
MEGA STIK is a fast curing adhesive foam that has been specially developed for the rapid installation of plasterboard, insulation boards, floorboards and roof decking. Supplied in an aerosol can, the product can be
used with a standard straw applicator or with a universal foam gun.
MEGA STIK is ideal for the installation of insulation boards and plaster boards to solid walls, metal and timber stud walls and battens. For fixing roof decking and floorboards to beams. And in place of backing rods in expansion joints and around window and door frames. It adheres to most common building materials:-
- Extruded and expanded polystyrene.
- Mineral Wool
- Polyisocyanurate and polyurethane foam.
- Plaster, gypsum boards.
- Concrete, brick, stone.
- Bituminous Membranes.
The instructions for the can must strictly be observed. Ideal working temperature for the foam is 20ºC. Shake the can for at least 30 seconds fix either the straw provided or a foam gun to the can. The can will operate in any position.
If fixing boards, apply beads to the back of the board wait approximately 2 minutes then press the board into place. If using insulation board apply 3 beads approximately 25mm wide to the board. If using plasterboard apply approximately 400m apart. Use mechanical fixings if working overhead.
Apply the boards in rows, starting from the bottom of the wall, and going up to the top to avoid sliding. Apply to the substrate within 5 minutes of applying adhesive (depending on outside conditions) and press firmly across the whole face of the board, starting at the top. Apply subsequent boards ensuring edges are firmly butted up at this stage.
Hold board in place for approx 1 minute until adhesive is cured enough to hold the board on its own. Plastering can commence after 1 hour! If using a gun and you have not used all the can, clean the nozzle or gun using Bond It Gun Foam Cleaner, screw in proportioning screw which will ensure the foam will be usable for up to approximately 4 weeks.
- 4 x Bond It Mega Stik (sufficient to fix up to 20 standard size plaster boards)
- 6 x Bond It Mega Stik (sufficient to fix up to 30 standard size plaster boards)
- 8 x Bond It Mega Stik (sufficient to fix up to 40 standard size plaster boards)
- 12 x Bond It Mega Stik (sufficient to fix up to 60 standard size plaster boards)
Kits include Teflon applicator gun and 1 can of cleaner.