Rytons DamRyt® Air Brick Protector (9×3 Cover & Frame Set)
The Rytons DamRyt is a flood water protection cover for low level 9″ x 3″ air bricks.
£19.50 (inc. VAT and standard delivery)
Out of stock
The Rytons DamRyt is a flood water protection cover for low level 9″ x 3″ air bricks.
Surface mounted cover and frame set to protect any 9″ x 3″ air brick, grille and grating from flooding.
Permanently fixed frame with a snap on cover that can be fitted in seconds.
Hidden seal inside the cover helps prevent water seepage.
Frame available in a choice of colours to complement external brickwork and render.
Red cover attracts attention and acts as a reminder to remove it when flood water has receded.
Colour matched frame allows your property to retain a normal appearance when not on flood alert.
Temporary cover allows necessary sub-floor ventilation in normal circumstances.
Frame manufactured from U.V. stabilised plastic to slow down the effects of sunlight.
Frame easily installed by an experienced DIYer.
Tools and fixings required:
Electric drill. Masonry drill bit. Spirit level. Tape measure. 8no masonry wall plugs. 8no screws. High adhesive exterior silicone sealant. Ensure you have the correct tools and materials for your masonry surface.
Installing the permanent DamRyt® frame:
Position the frame aperture level and central over the air brick or grille and mark all screw hole positions.
Drill screw holes using a suitable masonry drill bit and insert a wall plug into each hole.
Brush away brick dust and debris.
Break off the screw caps and place safely to one side.
Turn the frame over and fill the silicone trap (the gutter surrounding the aperture) with sealant.
Place the frame back against the wall and screw into position.
To seal any gaps between the brickwork and the frame run another bead of sealant around the inside edge of the frame aperture.
Push the screw caps into the counter sunk screw holes to finish.
Installing the temporary DamRyt® cover:
With tabs pointing upwards position the cover over the frame and snap together top and bottom.
Removing the temporary DamRyt® cover:
Release the tabs and lift away from the frame.
Store for future use.
You must be logged in to post a review.
Sub-Floor Ventilation
Reviews
There are no reviews yet.