No products in the basket.
Rytons LookRyt® AirCore® AC10LP
£23.51 (inc. VAT and standard delivery)
SKU: AC10LP
Categories: Rytons Vents, WARM AIR APPLIANCE VENTS
Rytons LookRyt® AirCore® AC10LP
AC10LP is a retro-fitted combustion air vent for boilers, stoves and fires.
Equivalent area 104cm²
HETAS approved product.
WARNING: Not suitable for use in external walls in high-rise buildings with a storey 18m or more above ground level due to Regulation 7(2) and Building Regulations Approved Document B.
Not suitable for use in external walls in buildings with a storey 11m or more above ground level due to Building (Scotland) technical handbook 2019: domestic and non-domestic, 2.7.
Equivalent area: 104cm²
Retro-fitted combustion air vent for boilers, stoves and fires.
Unique draught reducing internal panel disperses air evenly into the room for improved comfort.
Paint or wallpaper the internal panel to match room décor for a discreet appearance.
External water baffle prevents transfer of water across the cavity.
Interlocking components aid correct positioning, alignment and easy installation.
Grilles embossed with DO NOT BLOCK.
External grille U.V. stabilised to slow down the effects of sunlight.
Screws provided to secure the internal panel.
HETAS approved for use with solid fuel appliances.
Equivalent area tested to BS EN 13141-1:2004 and independently verified by the BRE
Screws: The four screws provided are for fixing the internal LookRyt® backplate to the internal wall. Any suitable fixings can be used for the external grille, dependent on the external surface.
Fitting the tube and external grille:
Drill a hole using a 127mm diameter core drill.
Cut tube to length if necessary then insert the tube into the hole.
Align and screw the external backplate and louvre grille into position. Tip: Save installation time by securing the external louvre grille to the backplate with a mastic sealant.
In exposed areas consideration should be given to using Rytons AirCore® Cowl (ABC8).
Fitting the internal LookRyt® panel:
Align and screw the LookRyt® backplate to the wall using the screws provided.
When happy with the positioning of the backplate, push fit the LookRyt® face plate on to finish.
The LookRyt® face plate may be painted or wallpapered to match the room décor.
Standard delivery is free of charge 3 – 5 day economy service.
We cannot offer a delivery day or time within this service. You can upgrade your delivery service from our menu of delivery services including next day, next day am.
Please allow plenty of time for materials ordered for a specific job at a specific time and day as we cannot guarantee third party delivery services.
Please read our delivery terms and conditions ahead of ordering.
Customers in a 35 mile radius of our own trade counter location can receive same day delivery service from our own vehicles on orders placed before 10am.
4 reviews for Rytons LookRyt® AirCore® AC10LP
Add a review Cancel reply
You must be logged in to post a review.
Jason (verified owner) –
Excellent service, turned up next day!
Aidan Merrick –
Hi Jason,
Thanks for taking the time to write your review, much appreciated. Glad to hear that the delivery service was on time too.
Please bare us in mind for any future material requirements.
Regards
Alliance Remedial Supplies
Brian Tunbridge (verified owner) –
Great, does the job and very fast delivery
Darren Hawkins –
Thank you Brian for your review as we try hard to make sure, that we dispatch quickly and
our products work well for their cause.
Regards
Alliance Remedial Supplies
Steve Robson –
Easy to place order on internet, updated via email dispatch/etc. Arrived very quick and very well packed. Opened packaging both were all there with parts and fitting instructions. Although I have not fitted yet I am sure the product is going to work fine. HETAS approved so is exactly what I need for both log burning room ventilation. Would highly recommend this company and product.
Nicola Herbert –
Great item, fast delivery, well packed. 4*