SANO IPIV LOFT H Intelligent loft mounted PIV with Heater
£705.26 (inc. VAT and standard delivery)
2 in stock
SANO IPIV LOFT H
SANO IPIV LOFT H is an intelligent loft mounted Positive Input Ventilation Unit with ECO-LoFlo Technology & integral Multicore heater.
The SANO Intelligent PIV Loft H is a loft mounted ultra quiet, low energy, low maintenance, home ventilation unit. The unit is designed to help ventilate a home using the well-established Positive Input Ventilation (PIV) principle. PIV units have been preventing and curing condensation dampness related problems in homes for decades. They are also used to control other indoor air pollutants and have even proven to be an effective means for reducing Radon gas in some properties. Elta Fans’ range of SANO Intelligent PIV units, with their unique ECO-LoFlo energy and comfort optimisation airflow control technology, represents a ‘step change’ in
PIV technology.
External air is drawn into the loft by the SANO Intelligent PIV Loft H unit. Before it passes through the unit’s filter, the air increases in temperature as it utilises otherwise unused energy in the loft from solar gain and heat loss from the home. This increase can be significant, but is typically around 3°C warmer than outside air over a heating season. This energy gain is significantly more than the energy used by the unit’s motor. The tempered, filtered air is then supplied centrally to the home via the unit’s outlet duct and ceiling diffuser.
Integral controls allow the SANO Intelligent PIV Loft H unit to be set to suit the individual requirements of the home. Airflow from the unit to the home is automatically regulated via integral temperature and humidity sensors which optimise the energy benefit of the unit while ensuring that sufficient air is always supplied to help control moisture and other pollutant levels in the home.
The SANO Intelligent PIV Loft H is fitted with an intelligent multicore heater that tempers incoming air when required. The temperature of the incoming air is selectable between 10°C and 20°C and the heater will always try and achieve this using the least amount of energy possible. The heater works in conjunction with our industry unique ECO-LoFlo technology to provide the best comfort level for the user in the most energy efficient way.
For WALL (Flats) applications please see the SANO IPIV WALL H unit.
Discreet Small white plastic supply air diffuser which will blend well with any ceiling while distributing the air as required.
Low energy Ultra-low quiet fan/motor assembly.
Robust and lightweight Fan casing construction built to last.
Run Monitor Records time power supplied to unit.
Low maintenance Very large G4 grade filter.
Integral, multi-functional controls With wide airflow and temperature settings which allow the unit to be fine-tuned to suit the individual requirements of a home and its occupants. These controls include:
• 8 unit settings to choose from to suit the size, layout, thermal properties and moisture production in the home.
• Heat Recovery or Comfort Control mode function with adjustable trigger temperature setting and adjustable increased/decreased airflow setting.
• Standby mode which switches the unit off when the temperature reaches the pre-set “Standby” trigger temperature to save energy and prevent undesirable warm air being introduced unnecessarily in to the home. e.g. during hot summer days.
• ECO-LoFlo function
• Override Boost mode to operate the unit at its maximum airflow by means of a user switch.
Suspension kit and joist mounting brackets Supplied for use as required.
Warranty Each SANO IPIV Loft H has a 5 Year Warranty as standard.
Normal
The unit will run in this mode for the vast majority of its operational time until the unit’s integral sensors switch it to Eco-LoFlo, Heat Recovery, Comfort Control or Standby mode or the Override Boost mode (if connected via a suitable switch) is activated by the occupants.
Eco-LoFlo
The unit constantly monitors the incoming air’s temperature and moisture content. When the incoming air is below 10°C the unit checks its moisture content to see how dry it is as less drier air is needed to be supplied to the home to control internal humidity levels. The unit’s Normal airflow is reduced automatically in proportion to its moisture content under this function, however, to ensure minimum ventilation rates are maintained, a minimum of 50% of Normal airflow is always provided. This unique control function can not only provide improved comfort levels for occupants, but can also significantly reduce the demand on their heating.
Heat Recovery
The unit will increase in speed when the loft temperature reaches the Heat Recovery trigger temperature to supply even more warmed air from the loft into the home.
Comfort Control
This mode can be selected as an alternative to Heat Recovery mode above. In this mode the unit will decrease in speed when the loft temperature reaches the Comfort Control trigger temperature reducing the amount of warm air entering the home.
Standby
The unit will essentially switch off when the loft temperature reaches the Standby trigger temperature to save energy and prevent undesirable warm air being introduced unnecessarily into the home e.g. during hot summer days. This function can be disabled if continuous running is required e.g. radon gas control.
Override Boost
The unit’s automatic controls can be overridden to operate the unit at its maximum airflow by means of a user switch hard wired to the relevant connections within the unit.
Product Overview – Sano_IPIV_Loft_H
Installation & Maintenance – Sano_IPIV_Loft_H_IM (1)
Standard delivery is free of charge 2 – 3 day economy service. We cannot offer a delivery day or time within this service. You can upgrade your delivery service from our menu of delivery services including next day, next day am.
Our delivery services do not include weekends.
Cut off time for next day services is 1pm.
Please allow plenty of time for materials ordered for a specific job at a specific time and day as we cannot guarantee third party delivery services.
Please read our delivery terms and conditions ahead of ordering.
Be the first to review “SANO IPIV LOFT H Intelligent loft mounted PIV with Heater” Cancel reply
You must be logged in to post a review.
Reviews
There are no reviews yet.