Tarmac restorer is a ready‐to‐use, black water based coating for tarmac drives and pathways.
- Restores tarmac colour.
- Helps protect from water damage.
- Ready to use.
- Reduces dirt/grime build‐up.
- Inhibits organic growth.
Designed to restore colour, reduce water penetration, and protect from dirt/grime build-up.
Ensure the surface to be treated is free from oil, grease, dust and any other loose material that may hinder adhesion. It is recommended that a test be carried out on a small inconspicuous area to ensure the required effect is achieved.
DRIVE ALIVE TARMAC RESTORER is ready to use, and does not require diluting. Stir thoroughly before using and ensure the surface is completely dry prior to application. Apply using a brush, roller or squeegee, ensuring that no pooling or ponding occurs. Two coats are recommended, allow a minimum of 4 hours between coats. Cold or humid conditions will slow drying times.
Do not apply to wet or damp surfaces or in conditions of high humidity. Surfaces should be allowed to dry completely for 48 hours prior to application. Do not use if rain is imminent (protect from rain until dry). Do not apply to nonporous surfaces. Keep children and animals away and do not traffic until fully cured. Do not allow any run off to contaminate drains, waterways or plants. Do not use in temperatures below +5ºC and above +30ºC. TARMAC RESTORER is not recommended for use on permeable tarmac. As there may be differences in the colour between different production batches, always check that the batch numbers are the same when using multiple tubs.
Container Size 4L rectangular plastic tub.
Colour Black liquid.
Coverage Approximately 16-24m² per 4 litres, depending on surface porosity.