Epoxy Patching Mortar
Epoxy Patching Mortar is a two part epoxy resin mortar specially developed to fill the need for a rapid setting mortar for the permanent repair of damaged concrete, joint edges, kerb stones and broken steps.
Its rapid setting properties make it ideal for the repair of concrete floors subjected to heavy usage and speedy return to use. It is suitable for interior and exterior repairs providing the surface to be repaired is dry at the time of application. Can be used for repairs to a depth of 100mm.
It provides a smooth, slip resistant, dust free surface which can be feather edged to match existing surfaces. The rapid strength development after laying enables return to use of heavy traffic after only 2 hours.
For the permanent patching and repair to concrete floors. For the repair of concrete, kerb stones, columns, beams, floor slab joint edges, steps, concrete pipes, pavements, roads, runways and bridges. Also ideal
for bedding in and setting manhole frames, bollards, guide rails, and bolt fixing, forming ramps and making up the difference in floor levels.
PRIMING: Not required unless the concrete is very porous, weak and soft, then apply one coat of TACK PRIMER. While the primer is still wet and tacky lay the Epoxy Patching Mortar.