Epoxy Safety Coating

Epoxy Safety Coating

Epoxy Safety Coating is a two-part epoxy coating designed to provide a tough, durable, traction enhanced flooring for concrete and timber surfaces. Having excellent chemical and abrasion resistant properties make it ideally suitable for food production areas, workshops and all floors that demand a safe, slip resistant and hygienic surface.

Ideally suitable for production areas, warehouses, workshops, plant rooms, goods in/out areas, in fact any floor that is heavily trafficked by fork lift trucks, pallet trucks, cars and pedestrians.

Fill all holes and face up all cracks etc with Epoxy Filler or Patching Mortar.

COVERAGE: 4.5 Litres will cover approximately 25m² depending upon the site conditions.

POT LIFE: When fully mixed approximately 30 minutes. Extended pot life at lower temperatures, reduced at high temperatures.

CURING /HARDENING TIME: Tack free in 12 hours @ 20 C. Re-coatable in 12 hours @ 20 C. Do not use at temperatures below 4C. Full cure in 7 days.

SLIP RESISTANCE: The fully cured product offers excellent slip resistance. Certified when tested to BS 7976-2. Mean PTV (Dry) 70 (Low Risk of Slip) Mean PTV (Wet) 60 (Low Risk of Slip)

COLOURS: Available in a range colours—see colour chart.

APPLICATION: Apply the coating immediately after mixing by roller. One or two coats can be applied. For best results apply two coats. Do not apply too generously otherwise the slip resistance will be compromised. Apply at a coverage rate of approximately 25 square metres per 4.5 litre pack. The second coat must be applied within 7 days. If this period is exceeded then lightly abrade the surface with carborundum papers to form a key for the second coat.