Delta FM Floor Membrane 40m2

Delta FM Floor Membrane 40m²

Delta FM Floor membrane 40m² is a low stud profile, fully recycled, high density polyethylene specifically designed for laying across basement and cellar floors as part of a complete cavity drain membrane installation compliant with BS8102.

It can also be used across stairs and areas with limited space to optimise the area.

The membrane can also be used above ground level to isolate damp slabs, slabs with high humidity and or contaminated floors.

There are no need for plug fixings to anchor the membrane to floors. It is simply loose laid with all joints overlapped and seals taped with Delta waterproof and vapour proof bitumastic tape. It is compatible with Delta Systems MS500.

Delta systems FM floor membrane 40m² is BBA approved and CE marked.

Compressive strength (EN ISO 604): > 700 kN/m²
Application: Special low stud profile for floors. Can also be used on walls.
Volume between dimples: approx. 2,6 l/m²
Colour: Brown
Sheet thickness: approx. 0.6 mm
Dimple height: approx. 4.5 mm
Weight: approx. 580 gr/m²
Service temperature range: – 30°C / + 80°C
Roll dimensions with 65mm flat tab on one side to lap and seal sheets: 20 m x 2,00 m (40 m²)