No products in the basket.
Ecobor 20 5Ltrs Boron Preservative
£74.50 (inc. VAT and standard delivery)
Ecobor 20 5Ltrs Boron Preservative
Ecobor 20 5ltrs Boron Preservative, brushable and injectable gel for use to treat against dry and wet rot as well as wood destroying insects.
Designed for use on all timbers at high risk of damage or decay such as joist ends, purlins, wall plates, cut ends and rafter ends.
Ecobor 20 boron preservative leaves no surface residues after treatment, is non-staining and can be over painted in time.
Permanent protection because the active ingredient does not break down.
Coverage:
By brush : 1 litre to 1 – 2.5 m2 of timber surface. Large dimensional timbers may need more than one coat and or, by injection using Ecobor 40
By injection : Apply as necessary or until refusal through pre-drilled holes.
For professional or trade use only. HSE No. 6838
Keep out of reach of children.
Brushable and injectable multi-use gel
Excellent highly penetrating preservative for the control of wood – rotting fungi and wood boring insects
Approved under COPR 1986 for use as a wood preservative
Low environmental hazard – no hazard symbol under COPR 1986
Clean, easy to handle and virtually non-drip
A clear and non-staining preservative gel
Odourless and non-flammable
Clean all wooden surfaces using a brush or vacuum cleaner.
To aid brushing out on any timbers, which are very dry or remains dusty, apply a little water to the surface before the application of ACS Ecobor 44.
Apply a generous brush coat of ACS Ecobor 44, taking care to ensure that end grains, corners and joints are well treated. Brush apply to any surfaces exposed by cutting after initial treatment.
Brush the ACS Ecobor 44 well into the surface taking care not overload the brush with the product, particularly on overhead, horizontal faces.
ACS Ecobor 44 may be used in outdoor conditions provided that the timber treated is then protected from weathering by an appropriate coating or sealant.
As a surface application the gel will not penetrate through paint, varnishes or other coatings and these should be removed before treatment. ACS Ecobor 44 can be injected through predrilled holes in areas where paint and coatings cannot be removed.
Clean all tools, brushes and equipment with water.
Data sheet: ECOBOR 20
Safety sheet: 041 ECOBOR 20 SDS
Standard delivery is free of charge 3 – 5 day economy service.
We cannot offer a delivery day or time within this service.
You can upgrade your delivery service from our menu of delivery services including next day, next day am.
Please allow plenty of time for materials ordered for a specific job at a specific time and day as we cannot guarantee third party delivery services.
Please read our delivery terms and conditions ahead of ordering.
Be the first to review “Ecobor 20 5Ltrs Boron Preservative”
You must be logged in to post a review.
You may also like…
Timber Treatments
£19.50 (inc. VAT and standard delivery)
Reviews
There are no reviews yet.