No products in the basket.
Liquid Surface Membrane
£40.80 – £152.40 (inc. VAT and standard delivery)
SKU: EPOXYMEM
Categories: DAMP PROOF PAINT, Floor Paint
Tags: damp proofing, Epoxy, Liquid Surface Membrane
Liquid Surface Membrane
This is a twin pack, epoxy resin for concrete floors prior to the installation of vinyl sheeting, tiles, suspended timber floors, laminates, carpets and most resin flooring systems. This product will provide a barrier preventing residual moisture movement under hydrostatic pressure and an highly effective barrier to oil and other contaminates.
USES: It will provide protection against residual moisture or oil from affecting subsequent floor covering installations. Concrete surfaces can be dry or damp during the application. It is an ideal waterproofing coating for floors and walls in cellars, basements, plant rooms, inspection pits and water retaining structures.
Ensure the surfaces are free from deep holes and wide cracks. Fill deep holes with PATCHING MORTAR or for small holes and cracks with EPOXY FILLER For extremely uneven concrete, resurface using a water resistant, polymer modified, cement levelling topping prior to applying the liquid surface membrane.
COVERAGE – A 4.5 Litre pack will cover around 20m² depending upon the porosity and texture of the substrate.
- Liquid Applied Surface Membrane
- Apply to Dry and Damp Surfaces
- Solvent Free and Low Odour
- Oil Tolerant
CHEMICAL RESISTANCE: Good resistance to spillages of many chemicals commonly met within industry.
CURING /HARDENING TIME: Tack free after 10 hours @ 20° C. Apply second coat within 48 hours of first coat. Do not apply at temperatures below 5°C. After 24 hours at 20°C the surface is suitable for subsequent pressure adhesive or application of a subsequent resin flooring system.
PREPARATION: Ensure the surfaces are free from deep holes and wide cracks. Fill deep holes with PATCHING MORTAR or for small holes and cracks with EPOXY FILLER For extremely uneven concrete, resurface using a water resistant, polymer modified,
cement levelling topping prior to applying LIQUID SURFACE MEMBRANE.To maximise performance – or as an unprotected wearing finish- all concrete to be treated must be sound, and as clean as possible. Remove all surface dust, grease oil and other contaminates. For small areas use of our ‘Degreaser’ or for large areas vacuum shot blasting is recommended. Vacuum the areas prior to application
MIXING: Empty the entire contents of Pack “B” (Hardener) into Pack “A” (Resin) and stir using a mixing paddle in an electric drill on a slow speed for 3 minutes. Ensure you reach both the sides and bottom of the container during the mixing process.
APPLICATION: Apply one coat on smooth surfaces and two coats on textured Surfaces or when maximum performance is required. Apply the coating by roller immediately after mixing and use all within 30 minutes. When applying onto damp concrete ensure you work the coating well onto the surface. For damp proofing, where possible continue the membrane up the walls to meet the damp proof membrane. Do not cover expansion or construction joints
Standard delivery is free of charge 2 – 3 day economy service. We cannot offer a delivery day or time within this service. You can upgrade your delivery service from our menu of delivery services including next day, next day am. Next day services do not include weekends.
Please allow plenty of time for materials ordered for a specific job at a specific time and day as we cannot guarantee third party delivery services. Please allow plenty of time for your order to be with you in good time.
Please read our delivery terms and conditions ahead of ordering.
Be the first to review “Liquid Surface Membrane” Cancel reply
You must be logged in to post a review.
Reviews
There are no reviews yet.